Opened the vents on the Center Cabin Cover - 2 hours

 I'm a little tired of looking at that fuel system doubler, so I decided to jump over to the F-782C center cabin cover. I fitted and drilled the F-982D heat baffle to the cabin cover.

I need to open the vents up on the cover before I get too far. I have a piece of scrap angle that has an 1/8" radius outside edge (Left over from the seat backs) that I used. Drawing reference lines I then used the angle to open the vents.

 I used a piece of 1/4" oak as a guide to how much to bend the tabs. If the 1/4" oak fits into the tab opening...I am good.