My priming process is a little intense. First a scotchbrite scrub, then soapy wash, then acid bath, Degrease wipe, MEK wipe and prime.
All done with priming. Now to wait for it to dry.
I waited until the late evening to start assembling. I cleco's the assembly and clamped it in the vice, and started bucking.
As I started the row at the very top (where it isn't clamped well). I slipped with the rivet set and gave the piece a small smiley. Ugh....very annoying. I managed to perform some surgery and dressed out the smiley with some scotchbrite on the dremmel to remove any sharp edges.
I then wiped the area with acetone and masked off the set rivets and re-sprayed primer. Almost like it never happened.
