Sunday, November 24, 2019

Finishing the F-715 ribs - 4 hours

Now that the ribs have a few days to cure with the primer on them, I'm ready to rivet the nutplates on.




The F-776 bottom skin needs to be deburred from the match drilling and dimpled. Dimpling after the surface is primed usually results in the primer cracking. So I need to wipe these dimples clean with acetone and give a coat of primer to clean them up.

I struggled a bit with trying to figure out when to rivet the ribs to the bottom skin. The plans don't say and according to the different build logs I reference...So do it now, some do it later. I'm a tad concerned at the accessibility of driving the -4 rivets in the side skins at this location in the future, so I'll hold off riveting them for now. 






No comments:

Post a Comment