Fabricating the remaining front deck attach angles - 3 hours

I need to get the F-721C and & D attach angles fabricated and fit to the canopy deck. So I spent a little time fabricating the 4 angles. To fit them to the canopy deck properly will take a little bit of time. I will need the instrument panel sent into place and then this will dictate the proper placement of the attach angles.

I installed the F-7103B angles onto the instrument panel and then installed the instrument panel into place. Now...Next is the important part. I then clecoes the entire top skin back on the front deck, this sets the instrument panel in the correct location. I can then carefully mark out reference lines on the tape.

Removing the top skin...I now can working from the reference lines with good access. I then can set and drill the F-721C & D angles to the canopy deck. I am very happy with the result.