Sunday, August 24, 2014

More Tools!

I noticed that Canadian tire has some tools on sale this week. I picked up a digital caliper for $14.00 and a 5" vice for $44. Great deals! Looked on the internet at paint schemes. A bit early to be looking at that, it's just fun though. Reading some more builders logs on the Empennage construction. Getting a sense of the construction order. Metal prep work, drill debur, etc.  Clean, Prime, Dimple.  Been researching more on primers....wow, my head is spinning. There is no end to figure out a decent priming job. Some guys swear by rattle can primers. Aircraft spruce and Canadian Tire both sell the same Dupli-color self etching primer. Epoxy primers seem good, but reading Endura Paints process on cleaning the aluminum prior to application is nearly a full days process! I think I may be wise to conduct my own priming tests. I see Canadian Tire sells rolls of sheet aluminum, I guess  I have a project to work on before my tools and kit arrives.
Also been trying to find a 3M cut and polish wheel for a pneumatic die-grinder as well as a 6" wheel for the bench grinder....The search is on! (P.S. The problem with reading all the forums on building the RV is that most of the products are only available in the US, or available from Aircraft.ca with huge shipping charges!!!)

Tools to look at buying: A pneumatic cleco gun, a 3M cut and polish wheel for a die grinder, and #40 and #30 drill bit reamers.

Saturday, August 23, 2014

Buying more tools!

Have set up the garage more. Went to home depot and IKEA. I bought a small table on rollers and also bought a bench grinder and sanding station. I have been reading up on methods of sanding. To my surprise folks seem to be using a course grit sandpaper (60-80) but the FAA Acceptable methods indicates 150 or finer. More reading suggests that Aluminum Oxide sandpaper is acceptable. However silicon carbide abrasives are not good to use as the silicon can contaminate the aluminum. Black sandpaper contains carbon, which can accelerate corrosion. Steel wool on aluminum is not acceptable either.


Friday, August 22, 2014

Ordered the Empennage!

Well, today is the day. I ordered the RV-7A Empennage with electric trim and some practice projects and some tools (Boelube, 3m tape and scotchbrite wheel, 2 practice kits, Aluminum Tool box).  Getting excited!
Been researching deburring methods. Seems critical that all aluminum edges are properly deburred. The rule of thumb is that no metal edges should cut fingers. There is debate on the forums about deburring lightning holes.
Found a great chart

SCOTCHBRITE GRIT CHART

7445 - White pad, called Light Duty Cleansing - (1000)
7448 - Light Grey, called Ultra Fine Hand - (600-800)
6448 - Green, called Light Duty Hand Pad - (600)
7447 - Maroon pad, called General Purpose Hand - (320-400)
6444 - Brown pad, called Extra Duty Hand - (280-320)
7446 - Dark Grey pad, called Blending Pad (180-220)
7440 - Tan pad, called Heavy Duty Hand Pad - (120-150)

Thursday, August 21, 2014

Still getting organized

Stopped by Sherwin Williams today on my way home from work to ask about primer. The girl behind the desk said that the person to talk to (Chris) was away and should be back next week. I stopped by Home depot and princess auto to look at more tools (Drill Presses, Parts Bins, Paint guns, etc.) So far princess auto looks like it has a ton of tools for metal working. Looked at vices, dollys, air hoses, everything. I need to go back and by some parts bins. Worked on organizing the basement storage room. Threw out old tools (old pop rivet gun, old pop rivets, etc). Want to make sure no old sub standard parts filter into the build inadvertently.

Wednesday, August 20, 2014

Getting organized

Researched Canadian Tire, Home Depot, Lowes. Tried to find what products they have.  Organizing bins, MEK, Respirators, Gloves, etc. Canadian tire has MEK for $12.00. Home depot have respirator masks. That's about all that I have found out. Worked in the garage with the kids to clean the tools up and shelves in the garage. Lots to still do yet. Need to sell a bunch of stuff on Kijiji. Need to make more room!! 

Tuesday, August 19, 2014

Ordering the Tool Package

Ordered the RV Tool kit from Planetools.com with most of the upgrades. Sioux drill, tungsten bucking bar, pneumatic squeezer, extra yokes. Now I'm just waiting. I will have to put in my order for the empennage and practice kits soon.

Monday, August 18, 2014

Tools Research

Spent the entire evening researching tools. Everything I have read is that the Sioux Air tools, Pneumatic rivet squeezers, the DRDT-2 dimpler are all must have's. I've looked into the RV Tool Kits from Aircraft Spruce, Brown's Aviation, Cleveland Tool and Planetools.com So far Planetools.com seems to have the best components. I have emailed Planetools.com and his shipping quote is very good.